AlgoClear Pro is a high purity quaternary ammonium. It is a biocide working by contact with microbial life. It will act on small organisms by puncturing their cell walls. Its concentration is 40%. High Purity means the product does not contain solvents and will not affect silicone additives / sealants / coatings found in modern construction products. AlgoClear Pro is recommended by K Rend. AlgoClear Pro is surfactant: It is a powerful soap. The product foam on impact at low concentration. It will, when brushed and rinsed, remove grime from a surface as well as sanitising it.
Algoclear Pro does not contain aggressive or oxidising agents such as bleach, acid, lye etc. and is neither corrosive, nor bleaching.
MetaClear is a non penetrating gel formulated for removing black discolouration from render and masonry without impregnation. Brush on and rinse, the gel is fast acting and low odour.
MetaClear lubricates the brush and limits the risk of surface abrasion. The detergency is achieved through the action of sodium hypochlorite and the sequestration of impurities in the gel.
MetaClear is used before or after the AlgoClear treatment. If the surface is too contaminated, it is preferable to open the pores first and soak the render after. In many other instances, the AlgoClear treatment is carried out first and the remaining marks either left to recede naturally, or removed with MetaClear.
The delivery system consists in pumping the MetaClear up a pole into a brush. The product is then rinsed.
OxiClear is a non penetrating brush applied gel for removing metal oxidation marks - iron, copper, lead etc - roofing materials and porous surfaces. OxiClear will also work on non porous surfaces such as GRP, UPVC glass etc. The active ingredient is phosphoric acid, an organic acid at a concentration where the risk to people and material is easily controllable.
GraffiClear removes all types of graffiti. This professional grade formulation can be used on porous and non porous surfaces. Fast and easy to use. Ghost marks are removed with an alkali soap. Water soluble, low odour, non toxic, non caustic, non corrosive and solvent free.
HydroClear is a high performance, deep penetrating sealer for porous brick, stone, render and concrete surfaces. This unique formula gives long lasting protection against water penetration and damage combined with exceptional breathability. UV resistant.
HydroClear is recommended on westward elevations or where the design does not make due allowance for overhangs.
OleoClear is an ultra effective degreaser, removing grease, grime and oil etc from hard surfaces. A superb neutraliser and wash-down solution, its low hazard formulation makes it very safe to use. The product is primarily used in amenity maintenance: Car park, bus stations etc. OleoClear keeps working for several weeks and has a low hazard formulation.