Categories

Roof Cleaning

Dilution Rates

AlgoClear Container

Recommended Usage

AlgoClear®is effective at very low levels. However, the biological load at the surface requires to adapt the concentration of the solution and application rate to the task at hand.

  • Low biological loads are typically glazing, polytunnels, and areas receiving regular attention.
  • Average biological loads will be areas around the house, sports surfaces, multi-use game areas etc
  • Heavy biological loads: Soiled surfaces, roofs. mossy areas, blanket fungi. Consult TVSP for specific advise on use.

A second factor influences the efficacy of chemicals: Temperature. Below 8o C the drop in efficacy is less predictable and a risk of incomplete result increases.

Precautions

It is more economical to remove the larger lumps of moss before application. When the substrate is porous or presents cracks and gaps, ensure good flooding of the interstices to interrupt the algae reproductive cycle.

Effects on plants: The active ingredient in AlgoClear® Pro can have adverse effects on plants. At the point of contact a discolouration takes place. The chlorophyll is replenished after a few days of growth on grass, but petals do not recover. The damage is limited to the point of contact and proportional to the intensity of the spill.

Coverage indications for average and low biological loads

AlgoClear® is available in 5 and 10 litre containers. AlgoClear® Pro is available in 5 and 10 litre containers.

Make selection below.

SUMMER AlgoClear® 5 litre AlgoClear® 10 litre
Dilution rate 1/12 to 1/14
Biological Load Average Low Average Low
Diluted quantity 65 litres 75 litres 130 litres 150 litres
Textured/porous surfaces 4m2 / litre = 260m2 4m2 / litre = 300m2 4m2 / litre = 520m2 4m2 / litre = 600m2
  5m2 / litre = 325m2 5m2 / litre = 375m2 5m2 / litre = 650m2 5m2 / litre = 750m2
Smooth or non-absorbent surfaces 6m2 / litre = 390m2 6m2 / litre = 450m2 6m2 / litre = 780m2 6m2 / litre = 900m2
WINTER AlgoClear® 5 litre AlgoClear® 10 litre
Dilution rate 1/10
Diluted quantity 55 litres 110 litres
Textured/porous surfaces 4m2 / litre = 220m2 4m2 / litre = 440m2
  5m2 / litre = 275m2 5m2 / litre = 550m2
Smooth or non-absorbent surfaces 6m2 / litre = 330m2 6m2 / litre = 660m2
SUMMER AlgoClear® Pro 5 litre AlgoClear® Pro 10 litre
Dilution rate 1/48 to 1/56
Biological Load Average Low Average Low
Diluted quantity 245 litres 285 litres 490 litres 570 litres
Textured/porous surfaces 4m2 / litre = 980m2 4m2 / litre = 1140m2 4m2 / litre = 1960m2 4m2 / litre = 2280m2
  5m2 / litre = 1225m2 5m2 / litre = 1425m2 5m2 / litre = 2450m2 5m2 / litre = 2850m2
Smooth or non-absorbent surfaces 6m2 / litre = 1470m2 6m2 / litre = 1710m2 6m2 / litre = 2940m2 6m2 / litre = 3420m2
WINTER AlgoClear® Pro 5 litre AlgoClear® Pro 10 litre
Dilution rate 1/40
Diluted quantity 205 litres 410 litres
Textured/porous surfaces 4m2 / litre = 820m2 4m2 / litre = 1640m2
  5m2 / litre = 1025m2 5m2 / litre = 2050m2
Smooth or non-absorbent surfaces 6m2 / litre = 1230m2 6m2 / litre = 2460m2

Cart  

No products

£0.00 Shipping
£0.00 Total

Checkout

Render Cleaning